Inteli-Power: Read Charger Ratings and Watts

Treat Inteli-Power as a product-documentation search

Inteli-Power is a Progressive Dynamics product name used for converter and charger equipment. A search for that name may be asking for a manual, replacement part or charging specification rather than a numerical unit conversion. Start with the exact model number on the equipment and the manufacturer’s documentation. The local Power Converter is an independent arithmetic tool. It does not identify a charger from the brand name, diagnose a fault or determine whether a replacement is compatible with a particular installation.

Separate AC input and DC output information

A converter or charger can list AC input power, DC output voltage and a maximum DC current. Those quantities describe different sides or conditions of operation. For a simple illustrative DC operating point of 13.6 V and 20 A, electrical output power is 13.6 × 20 = 272 W. That multiplication does not establish the actual operating point of a particular charger; the voltage and current must belong to the same measurement or specified condition. A no-load voltage and a maximum current rating are not automatically simultaneous operating values.

Use a documented model example carefully

Progressive Dynamics lists separate specifications for its Inteli-Power 4600 Series models, including maximum DC output current and maximum continuous input power. That distinction is precisely why a single generic “Inteli-Power watts” answer would be misleading. Consult the current model-specific table rather than inferring input power from the largest ampere number printed elsewhere. Converting a listed 950 W maximum continuous input to 0.95 kW changes the unit only. It does not mean the equipment continuously draws that power during every charging stage or at no load.

Keep compatibility and charging settings with the manufacturer

A battery chemistry, voltage system, installation arrangement and charging profile are not determined by a wattage conversion. Use the exact installation and operating guide for those decisions. If the purpose is an energy estimate, a measured average input over time is different from a maximum rating; multiplying a maximum by duration gives a stated upper-assumption calculation, not observed consumption. Record the model, the precise rating label and the unit conversion together so that the source of the number remains identifiable when comparing equipment information.

Derive power units from energy and time

Power is energy transferred per unit time. A watt equals one joule per second, so 1 kW equals 1,000 W and 1 MW equals 1,000,000 W. A kilowatt-hour measures energy, not power; it is the amount transferred by a constant kilowatt over an hour. To infer average power from energy, divide by the elapsed time in compatible units. For example, 3 kWh used over 2 hours corresponds to an average of 1.5 kW, even if the instantaneous power varied during that interval.

Identify the horsepower or thermal convention

The local power converter uses mechanical horsepower, approximately 745.6999 W per hp. Metric horsepower is a different convention and should not be assumed from an ambiguous hp label. The BTU/hour option uses International Table BTU, with approximately 1,055.05585 J per BTU and 3,600 seconds per hour. Consequently 1 BTU/hour is about 0.2930711 W. A BTU without “per hour” is energy; adding or dropping the time denominator changes the physical quantity. Retain the original convention when comparing specifications from different sources.

Convert a rating without inventing performance

Select the stated original power unit under From and the requested unit under To. The calculation preserves that rating’s physical meaning: input power remains input power, output power remains output power, and a maximum remains a maximum. A unit factor does not supply duty cycle, efficiency or typical consumption. Two devices with equal watt ratings may differ in other relevant characteristics. Keep the rating label and operating conditions with the converted number, especially when the source distinguishes continuous power from a short-duration peak or an electrical input from useful mechanical output.

Related guides

Power Conversion Formulas: Watts, hp and BTU/h

Convert power between watts, kilowatts, mechanical horsepower and BTU per hour, derive the factors, and separate energy consumption from a power rating.

Electrical Energy Conversion: Worked Examples

Calculate electrical energy from power and time, convert kWh to joules, and separate a unit change from useful heat, light or mechanical output.

Motor Energy Conversion: Input, Output and Losses

Model a motor’s electrical input and mechanical output, apply efficiency over a stated duration, and distinguish shaft ratings from measured consumption.