Construction & Materials

5 degree roof pitch per metre

5 degree roof pitch per metre: calculation method, required inputs, worked check, limitations and a link to Roof Pitch Calculator. Reviewed 25 September 2026.

By Uddhav Gopani, FounderPublished 25 September 2026Reviewed 25 September 2026

For “5 degree roof pitch per metre”, the linked Roof Pitch Calculator is relevant because Free, browser-based Roof Pitch Calculator.

What this specific question is asking

Before running Roof Pitch Calculator, write down what rise (inches) and run (inches) mean for your case — including each unit and time period. The calculator multiplies whatever it is given; the setup decides whether the answer is usable.

Test the setup before trusting the output: rerun the example with a doubled rise (inches) and see whether the result behaves as the formula implies. Direction first, precision second.

Inputs to verify

Verify rise (inches) before calculation; if this value uses a different unit, period or definition, convert or restate it first.
Verify run (inches) before calculation; if this value uses a different unit, period or definition, convert or restate it first.

Step-by-step check

Enter the rise in inches.
Enter the run in inches, usually 12.
Read the pitch shown as a ratio over the run.
Tap Calculate to see the angle, slope factor, and grade.

Worked example and sanity check

As a worked reference for “5 degree roof pitch per metre”, Worked example A roof rising 3 m over a 6 m run has a pitch of 3 ÷ 6 = 0.5, i.e. a 26.6° slope (arctan 0.5) or '6 in 12'.

Interpreting the result

The output is only useful against a reference. The example's ing 3 m over a 6 m run has a pitch of 3 ÷ 6 = 0 gives that reference: your own result should be explainable against it — larger or smaller for a reason you can name. Round up for waste, breakage and site variance — the computed quantity is a clean-geometry estimate, not a purchase order.

Reviewed 25 September 2026

Verify any current tax threshold, lender rate, provider rule or health guidance with the authoritative source before acting.

Use the Roof Pitch Calculator

Open Roof Pitch Calculator

Common questions

Which inputs matter most for 5 degree roof pitch per metre?

The key inputs are Rise (inches), Run (inches). Match their units and periods before using Roof Pitch Calculator.

How can I check an answer for 5 degree roof pitch per metre?

Reproduce the worked example with its stated inputs first, then change rise (inches) by a known amount and confirm the output moves the way the relationship predicts. Only then substitute your own values.

When should I recalculate 5 degree roof pitch per metre?

Recalculate whenever any input's basis changes: a new measurement, a revised rate or threshold, a different period convention, or an updated policy figure.